Shrub Installation Cost Calculator

How Much Does Shrub installation Cost?

There is no single price for shrub installation, because the total depends on the size of the job, the products you choose, the condition of the surfaces and what your local rules require. Two homes can ask for the same work and get very different quotes.

The table at the end of this article shows four example projects calculated by this tool. Use them as reference points, then run your own numbers in the calculator above.

How This Calculator Works

The calculator builds your estimate from the same pieces an contractor would price. It uses planning assumptions rather than live contractor data. Your ZIP code is used only to match you with local professionals and does not change the price. The labor market and timing you choose in Step 4 do.

Number and size: plant cost scales with the number of shrubs and size, and labor with the planting hole size.

Ground and access: clay, rock and tight access slow the work.

Extras: mulch, compost, drip, old shrub removal, winter protection, warranty, pruning, permits and contingency are added only when selected.

Labor market and timing: Step 4 adjusts labor for a lower-cost, national-average, higher-cost or highest-cost market, and adds 15% (fast-track) or 40% (rush) to labor.

Levels: Budget, Standard and Premium use different product grades, supplier markups, labor rates and labor hours. They are not one number multiplied by a percentage.

What Drives the Cost of Shrub installation

Number of shrubs: more shrubs cost more.

Shrub size: larger plants cost much more.

Shrub type: specialty plants cost more.

Ground: clay and rock slow digging.

Access: tight sites add labor.

Local labor market: landscaper rates differ between regions.

Materials vs Labor

Shrub installation is plant-cost-heavy for large sizes and labor-heavy for small sizes.

Shrub size and ground drive the biggest swings.

Permits and Inspections

Most basic planting, sod and mulching projects need no permit. Permits are commonly required for grading and drainage changes, retaining walls over a set height, irrigation and backflow devices, outdoor electrical lighting, tree removal in protected areas and work near streams or wetlands. Rules vary by city and county, and some neighborhoods also require association approval. This calculator includes a permit allowance only if you tick it.

Common Types of Shrub installation Jobs

• Foundation shrubs.
• Privacy hedge.
• Flowering shrub border.
• Evergreen screening.
• Shrub replacement.

Repair, Replace or Upgrade?

Plant smaller shrubs to save money and allow time to grow. Use larger sizes where you want an immediate screen or focal point.

Budget, Standard and Premium Projects

A budget project uses basic-grade products and a more cost-focused contractor. A standard project uses mainstream products with a experienced contractor. A premium project assumes higher-grade products, a higher labor rate and a top-tier contractor with a longer warranty. The three levels use different product allowances, labor rates and supplier markups. They are not the same number scaled by a percentage. Pick the level that matches the products you actually want, not just your budget.

Regional Pricing Differences

Contractor rates and material prices vary across the United States. Dense metro areas and regions with high licensing costs generally cost more than smaller markets. The labor market setting in Step 4 gives a rough adjustment for lower-cost and higher-cost areas, but treat the result as a starting budget and compare it with local written quotes for shrub installation.

When to Hire a Professional

Hire a licensed, insured landscaper or landscape contractor for grading, drainage, irrigation, retaining walls, large tree work and lighting. Simple planting and mulching can be a good DIY project, but poor grading, buried utilities, irrigation errors and tree work are costly to fix. Get at least three written, itemized bids, check licenses, insurance and references, and ask for a plant and workmanship warranty.

Preparing Your Home Before the Work Starts

A landscaping project goes best when you set the goal, budget and site facts first. Walk the yard, note sun and shade, slopes, drainage problems, soil type and where water pools, and decide what you want to keep. Mark the area on a simple sketch with measurements so every bidder prices the same job.

Plan for timing and care. Many plants, lawns and trees do best when installed in spring or fall, and new plantings need regular watering for the first season. Ask each bidder about plant warranties, watering instructions and what happens if something fails to thrive.

Questions to Ask Before You Hire

• What plant sizes and varieties are included?
• How far apart will you space them?
• Is mulch and soil prep included?
• What plant warranty do you offer?
• Who waters after planting?

Ways to Avoid Unexpected Costs

Get at least three written, itemized quotes for the same scope. Decide on product choices before work starts. Ask what happens if hidden problems are found, and agree on a written change-order process. Plan for trim, touch-up and cleanup work that may not be included, and keep a contingency of ten to fifteen percent for conditions that only show up once the work begins.

How to Compare Quotes

When you collect quotes for shrub installation, compare the same scope, not just the bottom line. Check which products are included and who supplies them, whether the permit and inspection are in the price, what is included for patching and cleanup, and how hidden problems will be handled. A low quote that leaves out the permit, the cleanup or the finishing work can end up costing more than a higher quote that includes them.

Ask each contractor to itemize materials, labor and any allowances. If two quotes differ by a large amount, ask both to explain the difference. The calculator’s line-item table gives you a reference list of the cost lines most jobs include.

Planning Checklist Before You Call

• Know what you want: product type, quantity and locations.
• Take photos and measurements of the area and anything that will be in the way.
• Note anything unusual, such as damage, limited access or older materials.
• Decide your priorities: lowest cost, longest warranty or fastest schedule.
• Set aside a contingency for conditions that are only visible once work starts.